The ZebraLight H60 is a high performance all aluminum headlamp. Powered with one 18650 battery, the H60 can produce a maximum of 190 Lumen out the front (Torch Lumen) with a smooth flood beam and and can run continuously for 26 days on its lowest output level. The H60 can be used as a headlamp as well as a task light with supplied accessories.

Main Features and Specifications

• LED: Cree XLamp XR-E Q5
• Color Temperatures: 5700-6350 K
• 3 modes, each can be set to one of the two levels for that mode
  • High: 190 lm (2 hours) or 110 lm (4 hours)
  • Med:   45 lm (10 hours) or 15 lm (50 hours)
  • Low:   0.5 lm (26 days) or    3 lm (9 days)
  Low and Med settings are memorized. Factory default settings are 110, 15 and 3 lm. All output are out the front (Torch Lumen) figures. Tested with Panasonic 2550 mAh 18650 batteries.
• Battery
  • One 18650 size (up to 67mm long) rechargeable within the 2.8v to 4.5v range, including 3.6v/3.7v Li-ion or 3.0v LiFeP04 chemistries.
  • Reverse polarity protection circuit. Works with batteries that have flat positive terminals.
  • Discharging protection circuit turns off the light when the battery voltage drops below 2.8v.
• Battery Shelf Life: Over 4.5 years under parasitic drain
• Out of the six levels, four (190, 110, 15, and 3 lm) are current regulated and two (45 and 0.5 lm) are PWM derived.
• Electrically conductive aluminum body provides inherent EMI/RFI shielding characteristics
• Weight
  • 1.2 oz (33 gram)
  • 2.7 oz (77 gram) with battery
  • 3.5 oz (100 gram) with battery and headband
• Dimensions
  • Length 3.6 inch (91mm)
  • Diameter (body) 0.85 inch (21.5 mm)
  • Diameter (head and tail) 0.92 inch (23.5 mm)
• 80 degree flood beam, with no hotspot.

Construction

• Precision machined casing from Alcoa premium grade aluminum alloy billet, light weight with superior structural strength
• Durable natural hard anodized finish (Type III Class I)
• Impact resistant LEXAN polycarbonate lens

Operations

• From Off
  • Press and hold to cycle through Low, Med and High, release to set.
  • Click to High, click again quickly to cycle through Med, Low and High.
• When On
  • Click to Off.
  • Press and hold to cycle through Low, Med and High, release to set.
  • Double click to toggle between the two levels for that mode.

Waterproof

• Dust-tight
• Protected against continuous immersion (1meter, >30 minutes)

Accessories in the package

• One black silicone holder with headband
• Pocket clip, can be put on or removed without any tools
• Two O-rings
• One glow in the dark silicone holder