Home | My AccountShopping Cart Shopping Cart 0 item(s)
Hello, Guest
  Discontinued Products

Home > Flashlight
SC32w CR123 Flashlight Neutral White
Item Id:ZLSC32w
SC32w CR123 Flashlight Neutral White
SC32/SC32w Flashlight
Write a Review
Out of Stock

Main Features and Specifications

  • LED: Cree XM-L2 Neutral White (Nominal CCT 4400K)
  • User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
  • Light Output (runtimes)
    • High:         H1 446 Lm (PID, approx 1.4 hr)   or    H2  245 Lm (1.6 hrs) / 100 Lm (4.1 hrs)
    • Medium:    M1 50 Lm (11 hrs)    or    M2   22 Lm (26 hrs) / 8.5 Lm (70 hrs)
    • Low:         L1   2.5 Lm (8 days)   or    L2   0.37 Lm (38 days) / 0.05 Lm (2.5 months) / 0.01 Lm (3 months)
    • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
    • Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic CR123A batteries.
  • Operating Voltage Range: 2.7V - 4.2V
  • Battery: One CR123A or 3.6/3.7V 16340 li-ion rechargeable. Batteries are not included in the box.
  • Parasitic Drain: Negligible (much less than the self discharging of a battery)
  • Beam Type
    • 80 degree spill
    • 12 degree hot spot
  • Dimensions
    • Head Diameter: 0.94 inch (24 mm)
    • Length:    2.6 inch (66 mm)
  • Weight
    • 1.34 oz (38 gram) 
  • Features
    • PID thermal regulated output at the H1 level
    • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
    • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
    • Builtin over-discharging protection
    • Durable electronic soft-touch switch
    • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
    • Precision machined unibody casing from premium grade  aluminum bar stocks
    • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
    • Durable natural hard anodized finish (Type III Class I)
    • Sealed and potted LED driver circuitry
    • Battery reverse polarity protection
    • Tempered optical grade glass
    • Preinstalled bezel down pocket clip
    • Orange peel textured reflector
    • Waterproof to IPX7 (2 meters, 30 minutes)


This light has 3 main levels (High, Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.

  • Basic Operation
    • One short-click turns on the light to High or turns off the light.
    • Two short-click turns on the light to Medium.
    • Three short-click turns on the light to the beacon-strobe mode.
    • Press and hold (for over 0.6 seconds) turns on the light to Low and then Medium and High. Release at the desired level.
  • Advanced Operation and Configuration
    • Press and hold to cycle from Low, Medium and High, release at the desired level to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
    • Double click to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorized after the light is turned off and through battery changes.
    • The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. Short click to turn off the light when finishing configurations. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.
    • This light uses the main LED (flashing 1 to 4 times) to indicate the estimated remaining capacity of the battery. To start the battery indicator, (from Off) short-click 4 times without pause.
    • Beacon-strobe mode can be accessed from 3 short-clicks when the light is Off. Once in the beacon-strobe mode, you can double-click to cycle through different types of beacons and strobes. Beacon-strobe settings are memorized when the light is turned off and through battery changes.


Accessories in the box

  • Two o-rings

User Guide

Customer Reviews Average Rating review
Great EDC
All the bells and whistles. I have carried a lot of lights but this one is by far the package I have been looking for. Crazy bright with a lot of options. I like the low and super low modes for getting around the house in the dark. Great color and beam.
Reviewed by: a user from Tennessee. on 5/24/2015
A Fine Thing in a Small Package
Another win for Zebralight. This is a perfect little light for everyday carry. The beam of the LED is a very nice clean white, without being too cool. What else to say about the size? Essentially 500 lumens in a light the size of a thumb. Can't beat it. This is my seventh Zebralight, and I have never been disappointed. They have all survived quite well in the pocket, even banging up against keys for years on end.
Reviewed by: a user from Alabama. on 3/12/2015